Jenolite Anti-Stonechip is formulated to protect your paintwork against stones, salt, damp and rust. Providing a tough, durable coating, use it to protect sills, lower body panels and spoilers against stone chip damage. Its non drip formula is easy to apply and will remain flexible – removing the worry of it cracking or peeling. It is also rust resistant and is over-paintable with most top coats.
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
Prepare the surface
Remove all loose dirt & debris from the area to be coated. If required, clean and thoroughly dry the area. Remove any previous surface coatings with a wire brush and abrasive paper.
Shake can vigorously before use. Apply from 15cm to 25cm in light coats. Apply a minimum of 2 layers. For high corrosion protection, bare metal should be treated with an anti corrosion primer prior to use.
Storage & Reuse
On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.