3 x Rust Shield Aerosol – 3 x 400ml


  • Ultimate protection against rust and corrosion
  • Leaves an impermeable, weatherproof barrier
  • Prevents the reappearance of rust – ideal for interior & exterior use
  • Clear, flexible glossy finish, highly resistant to cracking & crazing
  • Perfect after-treatment for our rust remover range

25 in stock


Jenolite Rust Shield Aerosol leaves a clear flexible glossy finish, with fantastic resistance to rust and corrosion. It provides the perfect after-treatment for our rust remover range and can also be used as an effective pre-treatment. Highly resistant to cracking it forms an impermeable, weather proof, barrier that helps to prevent the reappearance of rust. It is also rated to resists temperatures of up to 180°C. Suitable for use on all metals.

(Not suitable for painting over)

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

  1. Apply directly to a cool surface

    Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.

  2. Repeat the process

    Repeat the process 2-3 times for maximum protection, allowing 15 minutes drying time between each coat. Leave to dry for 24 hours before using.

  3. Storage & Reuse

    To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.


There are no reviews yet.

Be the first to review “3 x Rust Shield Aerosol – 3 x 400ml”

Safety Data

Download Safety Information