Jenolite Primer Filler is a specially formulated primer paint, which is perfect for correcting superficial defects in metal surfaces due to its gap filling properties. It’s designed to be used where a higher thickness is required when priming and can be sanded once fully cured. It is a fast-drying acrylic paint, suitable for priming a wide-range of metals, wood and plastic prior to top-coating.
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
ONLY USE IN WELL VENTILATED AREAS
Remove all traces of oil & grease with a suitable degreaser. Remove old paint and loose rust with steel
wool or a wire brush. Shake the can well before use, so that the agitator ball can be heard rattling.
APPLY IN SMOOTH EVEN LAYERS
Spray on to the target surface in smooth strokes from 15-30cm away. Leave to dry for 30 minutes between layers. Once dry, sand the layer lightly for the best adhesion. To fully cure, allow the product to dry for 24 hours before top coating.
STORAGE & REUSE
This aerosol should be stored out of direct sunlight and in temperatures below 50°C. To prevent
blockages, Invert the can and spray for 2 seconds. Extremes of temperature affect drying performance.