Rust Converter Aerosol | 3 x 400ml | Convert Rust to Ready to Paint Surface


  • Simple to use, converts rust to a ready-to-paint surface with no need for a primer
  • Fast acting rust converter, reacts with rust to convert it to a stable compound within 15 minutes
  • Resists water vapour, oxygen, carbon dioxide and bacterial growth protecting treated areas for the long term
  • Easy to apply, no need to rinse off or wipe, just leave to dry and the once rusted area is ready to paint
  • You can repaint the treated metal surface with either water-based or oil-based paint
  • Easy aerosol spray application, to provide an even coverage, whilst covering a large surface area
  • Coverage is approx 2-4m² per 400ml 
  • JENOLITE: the experts in rust treatment since 1939


Jenolite Rust Converter – Anti Rust Treatment

Fast & Effective Rust Treatment

JENOLITE Rust Converter Aerosol is a fast and effective way to treat rust. The epoxy based formulation chemically converts rust in to a stable surface that prevents further rusting.

Easy to use, simply spray directly onto rust and watch it work, transforming rust into a ready to paint black / purple surface. Resistant to water vapour, oxygen and carbon dioxide, once treated, the surface can be painted directly over, without the need for a primer.

Available in Aerosol and Non-aerosol formats.

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

  1. Prepare the surface

    Remove all loose dirt & debris from the area to be coated. If required, clean and thoroughly dry the area. Remove any previous surface coatings with a wire brush and abrasive paper.

  2. Shake can vigorously before use.

    Apply from 15cm to 25cm in light coats. Do not flood. Apply lighter coats to avoid runs. Apply 2 or 3 light coats, allowing 15 minutes to dry in between coats. For the best results, ensure that the rusted surface is agitated with a wire brush or sandpaper before application.

  3. Storage & Reuse

    On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.


There are no reviews yet.

Be the first to review “Rust Converter Aerosol | 3 x 400ml | Convert Rust to Ready to Paint Surface”

Technical Data

Download Technical Information

Safety Data

Download Safety Information