If you’re looking to protect your vehicle against corrosion, then the Jenolite bitumen undercoat is for you. This spray-on underseal is a thick, waxy fluid which drives out moisture and forms a tough, protective Weatherproof skin. It’s ideal for retouching bitumen underseal and chassis, as well as unreachable areas such as wheel arches and underbodies. It can also be used for seal-leaking gutters and patch roofs.
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
Prepare the surface
Remove all loose dirt & debris from the area to be coated. If required, clean and thoroughly dry the area. Remove any previous surface coatings with a wire brush and abrasive paper.
Shake can vigorously before use. Apply from 15cm to 25cm in smooth strokes. For high corrosion protection, bare metal should be treated with an anti-corrosion primer prior to use.
Storage & Reuse
On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.