Bright Zinc Galvanising Aerosol Spray Paint | All-in-One Primer & Topcoat | Superior protection against rust and corrosion


  • FAST AND EFFECTIVE: Bright Zinc Galvanising Spray Paint is the quick and easy way to touch up galvanised metal structures
  • ALL-IN-ONE PRIMER & TOPCOAT: All-in-One primer and topcoat saves time and money
  • SUPERIOR PROTECTION: High zinc content ensure superior protection against rust and corrosion. Ideal for use on cuts and welds
  • PERFECT COLOUR MATCH: Ideal match to galvanised metal
  • QUICK DRYING: Fast drying formulation allows additional coats to be applied after 15-30 mins.
  • Made in Britain


JENOLITE Bright Zinc Galvanising Aerosol Spray

Superior protection against rust and corrosion

JENOLITE Bright Zinc Galvanising Aerosol Spray is specially formulated to provide a way to quickly and effectively touch up galvanised structures. Bright Zinc Galv is a rich paint that is an accurate colour match for newly galvanised steel and is ideal for protecting welding joints and cut ends.

All-in-One Primer & Topcoat

  • A quick and effective way to touch up galvanised structures
  • Specially formulated to provide high levels of resistance to rust and corrosion
  • Provides superior protection to welds and cut ends
  • All-in-one undercoat and topcoat
  • Quick drying

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

  1. Shake well before use

    Shake the can thoroughly until the agitator moves freely. Hold upright, and spray evenly onto the surface from a distance of 25 to 30cm. Allow to dry for between 15 and 30 minutes when subsequent coats are to be applied. When applying finishing coats, allow at least 24 hours to dry thoroughly prior to application.

  2. Storage & Reuse

    To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place.

    Consult the safety data sheet before use.

Technical Data

Safety Data