Jenolite Directorust can be applied directly to rusted surfaces and acts as an all-in-one primer, undercoat and topcoat in a single application. Leaves a metallic Chrome gloss finish, with fantastic resistance to rust & corrosion.
Available in a variety of colours and finish
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
1. APPLY DIRECTLY TO A COOL SURFACE
Stir well before use, so that a smooth, uniform mix is obtained. Brush on in smooth strokes. Coat the surface with a maximum of 2 even layers, allowing 20 minutes to dry between layers.
2. ALLOW TO DRY
Allow at least 4 hours before use, full cure/hardness is obtained after 12 hours.
3. STORAGE & REUSE
Store out of direct sunlight, in a cool well-ventilated place. Consult the safety data sheet before use.
Coverage – 10sqm Per Litre