Directorust can be applied directly to rusted surfaces and acts as a primer, undercoat and topcoat in one application. Leaves a Metallic Copper Gloss finish, with fantastic resistance to rust & corrosion.
Available in a variety of colours and finishes.
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
Apply directly to a cool surface
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.
Allow time to dry between coats
Repeat the process 2-3 times for the maximum protection, allowing 15 minutes drying time between each coat. Directorust provides excellent protection against rust and corrosion.
Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.