Description
Jenolite Directorust Hammered Paint has been specially formulated so that it can be applied directly to rusted surfaces and acts as an all-in-one primer, undercoat and topcoat in a single application. Leaves an attractive hammered effect finish, with provides fantastic resistance to rust & corrosion.
Available in a variety of colours.
How To Use
Remove all traces of oil, grease, dirt & other contaminants. Remove old paint and loose rust with steel wool or wire brush.
-
Apply directly to a cool surface
Stir well before use, so that a smooth, uniform mix is obtained. Brush on in smooth strokes. Coat the surface with a maximum of 2 thin even layers, allowing 30 minutes to dry between layers.
-
Allow to dry
Allow at least 20 minutes for a touch dry finish, full cure/hardness is obtained after 24 hours.
-
Storage & Reuse
Store out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.
Coverage – 20m2 Per Litre