Directorust Radiator Enamel Paint Aerosol – Gloss White – 400ml


  • Leaves A High Quality, White, Gloss Finish
  • Provides A Tough, Long-Lasting Finish & Prevents Discolouration
  • High Temperature Resistance Up To 130ºC
  • Can Be Applied Directly To Metal Without The Use Of A Primer
SKU: 89067 Categories: ,


Jenolite Radiator Enamel is the perfect solution for dealing with rusty, chipped or discoloured radiator’s. Simply spray directly onto the radiator in smooth even strokes. This product will leave a high quality, white, gloss finish and has fantastic resistance to high temperatures. It provides a tough, long-lasting finish and prevents future discolouration.

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
1. Apply directly to a cool surface
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.
2. Allow time to dry between coats
Repeat the process 2-3 times to ensure that the whole surface has been covered. This product not only has fantastic heat resistant properties, but it also provides a tough, long-lasting  nish and prevents discolouration.
3. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool, well ventilated place. Consult the safety data sheet before use.