Jenolite Directorust Satin White is a specially formulated paint, which has been developed to be applied directly to rusty surfaces. It’s rust inhibiting properties make it the perfect all in one solution for treating rusty surfaces. It acts as a primer, undercoat and topcoat, leaving a silky satin finish once dry.
HOW TO USE
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
1. Apply directly to a cool surface
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.
2. Allow time to dry between coats
Repeat the process 2-3 times for the maximum protection, allowing 15 minutes drying time between each coat. Directorust provides excellent protection against rust and corrosion.
3. Storage & Reuse
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.