Directorust Slate Grey Satin | Multi Surface Spray Paint | For Use On Wood, Metal, Plastic, Ceramic & Rusted Surfaces |400ml (RAL 7031)


  • All-in-one aerosol paint specially formulated to act as Primer, Undercoat and Topcoat 
  • Apply directly onto an array of metals for long-lasting metal protection
  • Can be applied directly to rust, making it ideal for restoring metal, indoors and outside 
  • Corrosion resistant, actively fights against rust 
  • Leaves an attractive satin effect finish


Jenolite Directorust Multi Surface Satin Spray Paint is an all-in-one primer, undercoat and topcoat in one a single application. It can be applied directly to wood, metal, plastic, ceramic and rusted surfaces. Leaves a smooth, high quality satin finish, with fantastic resistance to rust & corrosion.

Available in a variety of colours and finish.

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

  1. Apply directly to a cool surface

    Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.

  2. Allow time to dry between coats

    Repeat the process 2-3 times for the maximum protection, allowing 15 minutes drying time between each coat. Directorust provides excellent protection against rust and corrosion.

  3. Storage & Reuse

    To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.

Safety Data