Description
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
- APPLY DIRECTLY TO A COOL SURFACE
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer. - ALLOW TIME TO DRY BETWEEN COATS
Repeat the process 2-3 times for the maximum protection, allowing 15 minutes drying time between each coat. - STORAGE & REUSE
To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place.
Consult the safety data sheet before use.