Jenolite Directorust Multi Surface Gloss Paint is an all-in-one primer, undercoat and topcoat in one a single application. It can be applied directly to wood, metal, plastic, ceramic and rusted surfaces. Leaves a smooth, high quality gloss finish, with fantastic resistance to rust & corrosion.
Available in a variety of colours and finishes.
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
- Apply directly to a cool surface
Stir well before use, so that a smooth, uniform mix is obtained. Brush on in smooth strokes. Coat the surface with a maximum of 2 even layers, allowing 20 minutes to dry between layers.
- Allow to dry
Allow at least 4 hours before use, full cure/hardness is obtained after 12 hours.
- Cleaning, Storage & Reuse
Clean brushes and rollers using a naphtha based cleaner such as JENOLITE Paint Thinner & Brush Cleaner. Store out of direct sunlight, in a cool well-ventilated place.
Coverage – 10sqm Per Litre
Consult the safety data sheet before use.