Pipe Repair Bandage

£17.99 Sale Save
  • Ideal for emergency plumbing repairs to damaged & leaking pipes
  • Simple & easy to apply where needed – flexible & self-welding tape
  • Strong adhesive properties – will cling to nearly all surfaces (stainless steel, aluminium, copper, PVC, plastics, fibreglass, concrete, ceramics & rubber)
  • Compressive strength up to150 bar & temperature resistant to150°C
  • Once cured can be sanded and painted over

Jenolite Pipe Repair Bandage is designed for emergency plumbing repairs of damaged and leaking pipes. The flexible, self-welding repair tape is made of glass fibre reinforced plastic and is ideal for quick emergency repairs of pipes indoors and outdoors. Simple to apply, it is activated by water and can be wrapped where needed, quickly and easily. Its strong adhesive properties will cling to nearly all surfaces and can be used on stainless steel, aluminium, copper, PVC, many plastics, fibreglass, concrete, ceramics and rubber.

Once fully cured it has a compressive strength of up to 150 bar and is heat resistant up to 150°C. After curing, the tape can be sanded and painted over.

Available in a range of sizes.

Before applying, roughen and clean the area to be repaired. Wear impervious gloves when mixing or handling uncured Putty. Then follow these easy steps.

1. Cut or twist off required amount.

2. Mix by kneading with fingers to a uniform colour. If mixing is difficult, warm Putty to room temperature or slightly above.

3. Apply to surface to be repaired within 10 minutes of mixing. Force into any cracks or holes and extend the patch at least 1 inch beyond the area being repaired.

When applying to a damp, wet or slowly leaking area, work the mixed material forcefully into the surface and apply pressure until adhesion begins to take effect.

For best results: Use damp fingers for easier mixing, application, and a smooth appearance of the cured compound. Remove excess material before hardening begins.

Curing: Putty has a work life of approximately 20-25 minutes. Functional cure occurs in 2 to 3 hours.

  • After mixing it forms a polymer compound that can be molded, wrapped around, or used to build up and repair various materials.
  • After 2 to 3 hours it can be sawed, drilled, carved, sanded, and painted.
  • Each handy stick contains pre-measured portions of activator and base throughout — no measuring or mixing tools are necessary. The consistency (like modelling clay) eliminates drips and runs, molds easily, and facilitates adhesion to the substrate.
  • Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes.
Size 3.5m x 5cm

Plastic Epoxy Putty Stick is a two component epoxy stick, that can be used to repair and rebuild most plastics. The hand-mixable, fast-setting epoxy resin putty forms a durable bond to most major plastic types. After mixing it creates a polymer compound that can be moulded, wrapped around, or used to build up and repair just about anything made from rigid or semi-flexible plastic.

A non-rusting, titanium reinforced epoxy resin putty that quickly repairs or rebuilds anything made of metal. Ideal for repairing cracked, snapped and holed metal, it offers an industrial strength solution. Suitable for high temperature use – up to 280°C. Functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted.

A non-rusting, aluminium reinforced epoxy putty. This putty quickly repairs or rebuilds anything made of metal. The two part epoxy resin can be mixed by hand and applied directly to the area that needs repairing or rebuilding. Ideal for repairing scratched, chipped and cracked metal. Once fully cured the putty can be drilled, tapped, machined, ground, filed and even painted. Easy to use, and essential for any mechanic's store cupboard!

A non-rusting, steel reinforced epoxy putty that quickly repairs or rebuilds anything made of metal. The two part epoxy resin can be mixed by hand and applied directly to the area that needs repairing or rebuilding. Ideal for repairing scratched, chipped and cracked metal. It offers an industrial strength solution that can withstand temperatures up to 149°C.  Functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted.

A two component epoxy resin stick, that can be used to repair pipes, tanks, hot pipes and vessels made of brass, copper, bronze and other non ferrous metals. Ideal for plumbing elbows, sink taps and water heaters. Will also seal freeze breaks in pipework. The hand-mixable, fast-setting epoxy putty forms a durable bond that after mixing creates a polymer compound that can be moulded to fit. Once fully cured it is completely waterproof and can be sanded and painted over. Ideal for plumbing emergencies such as repairing leaking hot lines. Perfect for pipe repair and plumbing applications, Jenolite's copper epoxy putty stick is the essential plumber's epoxy. Applications include plumbing elbows, sinks, taps, and water heaters. It can be used on brass, copper, bronze, and other non-ferrous metals.

A hand-mixable, specialty epoxy putty for repairs to damp, wet areas and underwater surfaces. After mixing, the epoxy resin forms a polymer compound that may be applied underwater (either fresh or salt water) and will bond tenaciously to substrates such as fiberglass, concrete. Ideal for marine repairs and repairs to damp, wet and underwater surfaces, such as holes, cracks, leaks and gouges in decks and hulls, swimming pools, hot tubs, spas, recreational equipment, as well as leaking tanks and gutters.  Full functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted.