JENOLITE Rust Converter is the fast and effective way to treat rust. The fast acting, water based formulation chemically converts rust in to a stable surface that prevents further rusting by creating a barrier to water vapour, oxygen and carbon dioxide. It also provides superior resistance to bacterial growth. Once treated, the surface can be painted directly over using most modern paints, without the need for a primer.
Easy to use, simply spray directly onto rust and watch as it gets to work, transforming rust into a ready to paint black / purple surface.
Available in aerosol and non-aerosol formats
How To Use
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
Apply directly to rust
Shake the bottle well and pour the required amount into a plastic container. Brush a thin even coat directly onto rusty areas only, working well into any pitted areas, corners and edges. Ensure that exposed corners and edges are well-treated to avoid rust creep beneath.
Wait 15 minutes
Jenolite Rust Converter turns treated surfaces blue-black as it reacts with the rust. IF AREA DOES NOT CHANGE COLOUR, RE-APPLY AFTER 30 MINUTES.
No need to rinse off.
Ready to paint in 3 hours
Apply a topcoat after a minimum of 3 hours. For the best results paint the same day. Always check product compatibility before use. If in doubt test a small area first.
Do not return excess Jenolite Rust Converter to the container. Wash brushes and equipment in clean water immediately after use. Splashes onto surrounding paintwork and skin may cause staining – wash off immediately with water.
Protect product from frost. Store between 5ºC and 15ºC.