Rust Converter – US – Gallon (3.784 Litre)

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

  1. Apply directly to rust

    Shake the bottle well and pour the required amount into a plastic container. Brush a thin even coat directly onto rusty areas only, working well into any pitted areas, corners and edges. Ensure that exposed corners and edges are well-treated to avoid rust creep beneath.

  2. Wait 15 minutes

    Jenolite Rust Converter turns treated surfaces blue-black as it reacts with the rust. IF AREA DOES NOT CHANGE COLOUR, RE-APPLY AFTER 30 MINUTES.
    No need to rinse off.

  3. Ready to paint in 3 hours

    Apply a topcoat after a minimum of 3 hours. For the best results paint the same day. Always check product compatibility before use. If in doubt test a small area first.

Do not return excess Jenolite Rust Converter to the container. Wash brushes and equipment in clean water immediately after use. Splashes onto surrounding paintwork and skin may cause staining – wash off immediately with water.

Protect product from frost. Store between 5ºC and 15ºC.

Safety Data

Download Safety Information