This is a very easy-to-use, thick liquid rust remover that can be applied by brush or immersion — a great solution for dealing with the difficult problem of rust on any iron or steel-based metal. With a fast treatment process, the liquid formula chemically reacts with the rust, making it easy to remove — you’ll be back to a bare metal surface in no time! The non-drip paste formula won’t run so it’s ideal for use on vertical surfaces or in places where you want to protect the surrounding paintwork. Jenolite rust remover — the professional choice since 1939.
HOW TO USE
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
1. Apply directly to rust
Pour the required amount into a plastic container. Brush liberally, directly onto rusty areas only. Keep Jenolite active by working in with a brush every 5 minutes and adding more if required. Do not allow the surface to dry out or become tacky. Vertical surfaces may require the most attention. Continue this process until all visible rust has turned dark grey in colour, at which point, wipe the surface dry with a clean, lint-free cloth. To ensure all rust has been successfully removed, brush away the dark grey residue with a wire brush/steel wool (if rust is still present thereafter, repeat the process as above until all rust has been removed).
2. For Immersion
Small components can be immersed in a plastic container. Leave until the rust has been removed,
drain excess liquid for one minute. Wipe dry immediately with a clean lint-free cloth.
3. Ready to prime in 30 minutes
After wiping dry, wait for 30 minutes, then apply Jenolite Primer or topcoat. For best results, prime same day. Always check product compatibility. If in doubt test a small area first.
Do not return excess Jenolite Rust Remover to the container. Wash brushes and equipment in clean water immediately after use. Splashes onto surrounding paintwork and skin may cause staining – wash off immediately with water.