Stain Blocker Aerosol – White – 400ml


  • Immediately blocks stains for good
  • Suitable for stopping all kinds of stains such as – Water marks, rust, nicotine, satins, grease, soot & pen marks
  • Works on most household surfaces
  • Easy to apply in aerosol form
  • Full cure in just 60 minutes
SKU: 89091 Categories: , ,


Jenolite Stain Blocker Aerosol is a specially formulated white primer paint, which permanently prevents existing stains such as water marks, rust, nicotine, satins, grease, soot & pen marks from reappearing again.

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
1. Only use In well ventilated areas
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.
2. Allow time to dry
To fully cure, allow the product to dry for 60 minutes drying time.
3. Storage & Reuse
This aerosol should be stored out of direct sunlight and In temperatures below 50°C. To prevent blockages, Invert the can and spray for 2 seconds. Extremes of temperature affect drying performance.