Jenolite Stop Leak Sealer Spray has been specifically developed to fill & seal joints in leaking guttering, pipework, drains, windows, roofs and other leaking areas. Stop Leak Sealer’s gap-filling and waterproof properties make it the perfect sealant spray for leaking joints that have become loose due to weather and corrosion. The spray creates a completely waterproof and corrosion-resistant surface, that remains flexible and pliable for years, and can be painted once cured.
Available in: White / Black / Clear
How To Use
PREPARE THE SURFACE:
Remove all loose dirt and debris from the area to be coated. If required, clean the area and thoroughly dry the area. Remove any previous surface coatings with a wire brush and / or abrasive paper.
SHAKE VIGOROUSLY BEFORE USE:
Shake can vigorously before use. Apply from approximately 15-20cm in light coats. Do not flood. Apply lighter coasts to avoid runs. Apply 2-3 light coats, allowing 15 minutes to dry between coats.
STORAGE AND REUSE:
On completion of use, invert the can and depress the actuator for a few seconds to prevent nozzle blockage.