£11.99 – £29.99
Jenolite Anti-Stonechip is formulated to protect your paintwork against stones, salt, damp and rust. Providing a tough, durable coating, use it to protect sills, lower body panels and spoilers against stone chip damage. Its non drip formula is easy to apply and will remain flexible – removing the worry of it cracking or peeling. It is also rust resistant and is over-paintable with most top coats.
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
Remove all loose dirt & debris from the area to be coated. If required, clean and thoroughly dry the area. Remove any previous surface coatings with a wire brush and abrasive paper.
Shake can vigorously before use. Apply from 15cm to 25cm in light coats. Apply a minimum of 2 layers. For high corrosion protection, bare metal should be treated with an anti corrosion primer prior to use.
On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.
Consult safety data sheet before use
