Directorust Radiator Enamel Paint – Gloss

£11.99 – £29.99

  • High quality white enamel gloss finish – resistant to discolouration and corrosion (non-yellowing)
  • Resistant to high temperatures – up to 130ºC
  • Durable & long-lasting finish
  • Refresh & Protect your radiators from everyday knocks and scuffs
  • Can be applied directly to bare metal without the use of a primer

Description

Jenolite Radiator White Enamel paint leaves a high quality, gloss white finish, that has fantastic resistance to high temperatures (up to 130ºC). The tough, long-lasting finish is formulated to prevent discolouration and is highly resistant to corrosion. Suitable for use on radiators and hot water pipes, it is a quick and easy way to protect and repair your radiators from everyday knocks and scuffs, keeping them looking fresh.

A fresh coat of white radiator paint is the perfect way to elevate the appearance of an old radiator. The appearance of radiators often gets neglected. But because most radiators are white, they are susceptible to discolouration, staining, and wear and tear accumulated over months of use of use. Jenolite’s white radiator spray paint offers a quick an easy solution to get your radiators looking as good as new, with the enamel, gloss finish offering that subtle shine. Our radiator paint resists discolouration, so a proper application can keep your radiator looking good for years to come.

Before application, remove old paint with steel wool or a wire brush. For particularly tough jobs, consider turning to our industrial strength paint stripper. Mix the paint well before use, and apply with smooth, even strokes. Repeat the process 2 or 3 times as necessary to ensure an even coating.

 

 

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

AEROSOL

  1. Apply directly to a cool surface

    Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.

  2. Allow time to dry between coats

    Repeat the process 2-3 times to ensure that the whole surface has been covered. This product not only has fantastic heat resistant properties, but it also provides a tough, long-lasting finish and prevents discolouration.

  3. Storage & Reuse

    To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool, well ventilated place. Consult the safety data sheet before use.

 

TIN

1. APPLY DIRECTLY TO A COOL SURFACE

Stir well before use, so that a smooth, uniform mix is obtained. Brush on in smooth strokes. Coat the surface with a maximum of 2 even layers, allowing 20 minutes to dry between layers.

2. ALLOW TO DRY

Allow at least 4 hours before use, full cure/hardness is obtained after 12 hours.

3. STORAGE & REUSE

Store out of direct sunlight, in a cool well-ventilated place. Consult the safety data sheet before use.

Coverage – 10sqm Per Litre

Safety Data

Download Safety Information

Customers Also Viewed