Steel Epoxy Putty Repair Stick – 7 inch (112g)

£12.99

  • Functional in just 60 minutes
  • Industrial strength compound
  • Withstands temperatures of up to 149°C
  • Easily moulded to fit and repair all metals 
  • Once cured it is fully waterproof and can be sanded and painted over

Description

Jenolite Steel Epoxy Putty Stick is a non-rusting, steel reinforced epoxy putty that quickly repairs or rebuilds anything made of metal. The two part epoxy resin can be mixed by hand and applied directly to the area that needs repairing or rebuilding. Ideal for repairing scratched, chipped and cracked metal. It offers an industrial strength solution that can withstand temperatures up to 149°C.  Functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted.

How To Use

  1. ONLY USE THE REQUIRED AMOUNT

    Cut or twist off the required amount, putting the remaining epoxy back in the tube and reseal with the cap.

  2. MIX WELL

    Hand mix the epoxy by kneading with the fingers until a uniform colour is formed. If mixing is difficult, warm Stick to room temperature or slightly above.

  3. APPLY TO SURFACE TO BE REPAIRED

    Ensure to apply within 2 minutes of mixing. Force into any cracks or holes and strike off excess material, preferably with a tool moistened with clean water. When applying to a damp, wet or slowly leaking area, work the mixed material forcefully into the surface and apply pressure until adhesion begins to take effect. Functional Strength is achieved after just 60 minutes.

Reviews

There are no reviews yet.

Be the first to review “Steel Epoxy Putty Repair Stick – 7 inch (112g)”

Safety Data

Download Safety Information