£16.99
Jenolite Titanium Epoxy Putty Stick is a non-rusting, titanium reinforced epoxy resin putty that quickly repairs or rebuilds anything made of metal. Ideal for repairing cracked, snapped and holed metal, it offers an industrial strength solution. Suitable for high temperature use – up to 280°C. Functional after 60 mins, once fully cured it is completely waterproof and can be drilled, tapped, machined, ground, filed and even painted.
Cut or twist off the required amount, putting the remaining epoxy back in the tube and reseal with the cap.
Hand mix the epoxy by kneading with the fingers until a uniform colour is formed. If mixing is difficult, warm Stick to room temperature or slightly above.
Ensure to apply within 2 minutes of mixing. Force into any cracks or holes and strike off excess material, preferably with a tool moistened with clean water. When applying to a damp, wet or slowly leaking area, work the mixed material forcefully into the surface and apply pressure until adhesion begins to take effect. Functional Strength is achieved after just 60 minutes.
