Industrial Strength Paint Stripper/Paint Remover Aerosol


  • PAINT STRIPPER & REMOVER: Industrial strength paint stripper spray
  • INDUSTRIAL STRENGTH: Powerful formula, removes paints, varnishes, lacquers, adhesives and gasket cement
  • MULTI-SURFACE: For use on brick, metal, wood and concrete surface (not suitable for use on plastic / UPVC)
  • NON-DRIP: Thick viscous formulation clings to vertical surface
  • FAST ACTING: Effective formulation gets to work fast


Jenolite Industrial Strength Paint Stripper aerosol spray is specially formulated creating a highly efficient solution to aid the removal of paint and other hard to remove residues. Suitable for removing paints, lacquers and varnishes from metal, wood, brick, and concrete. Other applications include residue and paint removal from gasket/adhesive residues on cylinder heads, crankcases, gearboxes, water pumps and also carbon deposits on valve seats, cylinder heads and metal engine components.

Apply liberally to ensure a good coating over the painted surface. After leaving for 15 minutes, use an abrasive implement – a painter scraper, or steel wool – to remove the paint. A second application may be necessary for removing thick coats of paint. Make sure to take the right safety precautions when using Jenolite paint stripper spray. The product should be used in a well-ventilated space, and you should wear tight-fitting protective goggles, as well as protective gloves. Our industrial strength paint stripper is perfect for heavy duty applications where natural methods won’t work.

Remember: repainting over old, flaking or peeling paint will lead to a poor paint job, and in some cases, can be dangerous. Get the job done properly with Jenolite’s industrial strength paint remover. When it comes to repainting, check out our range of specialist, anti-corrosion and anti-rust paints.

How To Use

  1. SHAKE WELL BEFORE USE: Spray the paint remover liberally onto the surface or component from a distance of 15 to 20cm, ensuring a good coating. Leave for up to 15 minutes to soften or dissolve the paint or gasket. Remove with a scraper or similar implement.
  2. REPEAT: Repeat application as necessary Do not allow the product to dry out before removal.
  3. STORAGE & REUSE: To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place.

Do not use on plastic or UPVC. Avoid accidental overspray by masking off any plastic areas.

Use in well ventilated area.

Consult the safety data sheet before use.

Safety Data