Industrial Strength Paint Stripper/Paint Remover Aerosol | 400ml
- PAINT STRIPPER & VARNISH REMOVER: JENOLITE Industrial strength paint stripper aerosol spray, is powerful paint stripper that is ideal for use on metal, wood, and brick surfaces, it works as an efficient varnish remover
- INDUSTRIAL STRENGTH: Powerful formulation, gets to work fast, immediately removing paint from most surfaces. Strong enough to work on paints, varnishes, lacquers, adhesives, graffiti and gasket cement it gets the job done
- MULTI-SURFACE: From paint stripper metal to varnish remover for wood, this product has a wide range of applications. It can even be used as a tile paint remover or on bricks and concrete surface (not suitable for use on plastic / UPVC)
- NON-DRIP GEL FORMULA: This paint remover for wood, metal and other surfaces is a non-drip gel, ensuring a mess-free application. It clings to vertical surfaces for effective stripping
- FAST ACTING & EASY TO APPLY: Effective formulation gets to work fast. Delivered in an aerosol can, this paint stripper spray ensures easy application. It is the best paint remover for wood, metal, and other surfaces due to its far-reaching spray
- *Not suitable for powder coated surfaces. May take several applications on surfaces with several layers of paint.
Jenolite Industrial Strength Paint Stripper aerosol spray is specially formulated creating a highly efficient solution to aid the removal of paint and other hard to remove residues. Suitable for removing paints, lacquers and varnishes from metal, wood, brick, and concrete. Other applications include residue and paint removal from gasket/adhesive residues on cylinder heads, crankcases, gearboxes, water pumps and also carbon deposits on valve seats, cylinder heads and metal engine components. Apply liberally to ensure a good coating over the painted surface. After leaving for 15 minutes, use an abrasive implement - a painter scraper, or steel wool - to remove the paint. A second application may be necessary for removing thick coats of paint. Make sure to take the right safety precautions when using Jenolite paint stripper spray. The product should be used in a well-ventilated space, and you should wear tight-fitting protective goggles, as well as protective gloves.
Our industrial strength paint stripper is perfect for heavy duty applications where natural methods won't work. Remember: repainting over old, flaking or peeling paint will lead to a poor paint job, and in some cases, can be dangerous. Get the job done properly with Jenolite's industrial strength paint remover. When it comes to repainting, check out our range of specialist, anti-rust paint.
- SHAKE WELL BEFORE USE: Spray the paint remover liberally onto the surface or component from a distance of 15 to 20cm, ensuring a good coating. Leave for up to 15 minutes to soften or dissolve the paint or gasket. Remove with a scraper or similar implement.
- REPEAT: Repeat application as necessary Do not allow the product to dry out before removal.
- STORAGE & REUSE: To prevent blockages, invert the can after use and spray for 2 seconds. This aerosol should be stored out of direct sunlight, in a cool well ventilated place.
Do not use on plastic or UPVC. Avoid accidental overspray by masking off any plastic areas.
*Not suitable for powder coated surfaces. May take several applications on surfaces with several layers of paint.
Use in well ventilated area.
Consult the safety data sheet before use.
Jenolite Industrial Strength Paint Stripper aerosol spray is specially formulated creating a highly efficient solution to aid the removal of paint and other hard to remove residues.
Unique gel like formulation helps the stripper cling to surfaces, making it ideal for vertical surfaces.
- Industrial strength paint stripper
- Effectively removes most paints, varnishes, lacquers, adhesives and gasket cement
- Unique formulation helps stripper cling to vertical surfaces to vertical surfaces
- For use on brick, metal, wood and concrete surfaces (Do not use on plastic or UPVC)
- Fast acting
