Jenolite Stain Blocker is a specially formulated white primer paint, which covers and permanently prevents existing stains such as water marks, rust, nicotine, satins, grease, soot & pen marks from reappearing again. Once fully dry it can be painted over, leaving a smooth, stain free finish. Can be purchased in Aerosol or Tin form.
How To Use
HOW TO USE
Remove all traces of oil, grease, mould and mildew. Remove loose and flaky paint.
Only use In well ventilated areas
Shake the can well before use so that the agitator ball can be heard rattling. Spray in smooth strokes from 15-30cm away. Coat the surface with a thin and even layer.
Allow time to dry
To fully cure, allow the product to dry for 60 minutes drying time.
Storage & Reuse
This aerosol should be stored out of direct sunlight and In temperatures below 50°C. To prevent blockages, Invert the can and spray for 2 seconds. Extremes of temperature affect drying performance.
APPLY DIRECTLY TO A COOL SURFACE
Stir well before use, so that a smooth, uniform mix is obtained. Brush on in smooth strokes. Coat the surface with even layers, allowing 30 minutes to dry between layers.
ALLOW TO DRY
Allow at least 4 hours full cure.
STORAGE & REUSE
Store out of direct sunlight, in a cool well ventilated place. Consult the safety data sheet before use.