Primer Filler | 400ml Aerosol Spray Paint

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush. 

1. ONLY USE IN WELL VENTILATED AREAS Remove all traces of oil & grease with a suitable degreaser. Remove old paint and loose rust with steel wool or a wire brush. Shake the can well before use, so that the agitator ball can be heard rattling.
2. APPLY IN SMOOTH EVEN LAYERS Spray on to the target surface in smooth strokes from 15-30cm away. Leave to dry for 30 minutes between layers. Once dry, sand the layer lightly for the best adhesion. To fully cure, allow the product to dry for 24 hours before top coating.
3. STORAGE & REUSE This aerosol should be stored out of direct sunlight and in temperatures below 50°C. To prevent blockages, Invert the can and spray for 2 seconds. Extremes of temperature affect drying performance.

Consult safety data sheet for additional information

Ideal for smooth finishes 

Jenolite Primer Filler is a specially formulated primer paint, which is perfect for correcting superficial defects in surfaces due to its gap filling properties. 

It’s designed to be used where a higher thickness is required when priming and can be sanded once fully cured. 

It is a fast-drying acrylic paint, suitable for priming a wide-range of metals, wood and rigid plastic prior to top-coating. 

Use it to create a smooth surface ready for painting. 

• With a tough acrylic formula, suitable for priming metal, wood and rigid plastic prior to top-coating 
• Ready to overcoat in 24 hours, compatible with cellulose, acrylic and P/u-alkyd and epoxy 
• Ideal for filling small surface imperfections to ensure a smooth surface ready for top-coating 
• Apply several coats to build up a totally smooth finish 
• Perfect for automotive use, model making, etc. 
• Quick drying