Rust Remover Gel – 5 Litre


  • Jenolite’s 5kg Rust Remover Jelly helps to remove rust from almost any metal object
  • Chemically reacts with the rust, making it easy to remove
  • Non-drip formula ensures it won’t run and makes it perfect for use on vertical surfaces
  • Ideal for treating small areas of rust on cars, such as stone chips, as well as on bikes, household appliances, tools and gardening equipment

13 in stock


If you need rust removed from almost any metal object then Jenolite’s 5 litre Rust Remover Gel can help. This product is the perfect solution for dealing with the difficult problem of rust on any iron or steel based metal. It can be used to remove the light oxide film created by shot blasting, ensuring a smooth, clean finish ready for priming and painting. Like all Jenolite products, our rust remover is easy to use. You can apply with a brush and the non-drip formula ensures that it won’t run, so it’s ideal for use on vertical surfaces. This tried and trusted rust remover jelly is excellent for treating small areas of rust on cars, such as stone chips, as well as on bikes, household appliances, tools and gardening equipment. Jenolite rust remover — the professional choice since 1939.

How To Use

Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.

  1. Apply directly to rust

    Pour the required amount into a plastic container. Brush liberally, directly onto rusty areas only. Keep Jenolite active by working in with a brush every 5 minutes and adding more if required. Do not allow the surface to dry out or become tacky. Vertical surfaces may require the most attention. Continue this process until all visible rust has turned dark grey in colour, at which point, wipe the surface dry with a clean, lint-free cloth. To ensure all rust has been successfully removed, brush away the dark grey residue with a wire brush/steel wool (if rust is still present thereafter, repeat the process as above until all rust has been removed).

  2. For Immersion

    Small components can be immersed in a plastic container. Leave until the rust has been removed,
    drain excess liquid for one minute. Wipe dry immediately with a clean lint-free cloth.

  3. Ready to prime in 30 minutes

    After wiping dry, wait for 30 minutes, then apply Jenolite Primer or topcoat. For best results, prime same day. Always check product compatibility. If in doubt test a small area first.
    Do not return excess Jenolite Rust Remover to the container. Wash brushes and equipment in clean water immediately after use. Splashes onto surrounding paintwork and skin may cause staining – wash off immediately with water.


There are no reviews yet.

Be the first to review “Rust Remover Gel – 5 Litre”

Technical Data

Download Technical Information

Safety Data

Download Safety Information

You may also like…